Volvo AWD V70-XC70 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 12/2001 V70-XC70 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

2004 V70 AWD cam cover torque spec V70-XC70 2004

posted by  Marlin Mangels on  Sat May 30 12:39 CST 2020
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Oct 21 15:41 CST 2014
[RELATED]

I've removed all the cam cover bolts and the cover is loose, but I can't lift it straight up because the VVT sprocket extend over the cover casting. I can't lift the cams because the sprocket also seems to hang up on something on the head that won't allow it to lift straight up. How should I proceed to get this off? Also, I was going to use the cam alignment set that I bought for my 960, but the slots on the cams on the V70 are at an angle up from front to back, rather than 180 degrees horizontal like the 960, so the alignment tool won't work. When I started, I cranked the cams forward clockwise, then backed up to the timing marks on the cover. Did I do something wrong? Thanks.
Marlin






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 2004 V70 AWD cam cover torque spec [V70-XC70][2004]
posted by  Marlin Mangels subscriber  on Fri May 29 15:37 CST 2020 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.