Well, what I mean by Slamming is if you go back into N and then back into D without going into 3 and pull it a little harder it will engage.

So tonight I did the following:
1. Placed the car in N and was able to start the car,
2. with the car off, but the key in the run position, I was able to see the reverse lights light in both directions.

Then I started the car and here is where I currently am.

While placing the car in D, if I go slightly past D and into 3, without lighting up the up arrow, and then back into D the car works fine, so I'm thinking I've moved the PNP switch a tad.

I will have to take a look at it this weekend, but for now the car is drive able.

I'll post back here once I'm able to look at it.

Thanks for all the help thus far.

Regards,

Matt