Volvo AWD Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2016

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Is Nivomat Conversion Impossible for P2 platform

posted by  KlausC on  Wed Jun 28 15:32 CST 2017
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 10:15 CST 2014
[RELATED]

If the Nivomats are not leaking, find something around 100lbs. First measure from ground to top of bumper, write it down.

Put a good weight in the hatch area close to the bumper - neighbor's kid works. Measure the distance again.

Then shove the back of the car up and down about 10 times. With the weight still in the car, measure again. If the shocks work, then you should be close to the original measurement.

Some people drive around the block, I suggest not with the neighborhood kids!
--
Keeping it running is better than buying new






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Is Nivomat Conversion Impossible for P2 platform
posted by  Hovonogila  on Mon Jun 26 22:02 CST 2017 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.