Volvo AWD V70-XC70 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 6/2020 V70-XC70 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Re: power source for boost gauge V70-XC70 1998

posted by  someone claiming to be Chie on  Mon Aug 23 10:59 CST 1999 [RELATED]

The dealer wasn't able to find in the parts manual the part number

for the pins for connecting into the accessory connector; but a

technician remembered that there was a service bulletin, and found

it with all the necessary part number information.

Here is what the bulletin has...

Minitimer pins for 8-pin connector

P/N Conductor Size

969780-6 0.5 - 1.0 mm2

974313-9 1.0 - 2.5 mm2

968374-9 2.5 - 3.0 mm2

It also say...a 2.5-3.0 mm2 conductor should always be connected to

pin-1 (battery) of the 8-pin connector due to possible high current

intensity.

Translating the mm2 number into gauge, I think for a 16-gauge or

18-gauge wire, which I will use for the turbo boost gague, I will

be using 974313-9.

Chie

1998 V70 T5M, IPD turbo boost gauge






<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.