Volvo AWD S70 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2004 S70 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Ignition switch doesn't engage S70 1999

posted by  someone claiming to be Peter on  Sat Jun 28 12:38 CST 2014 [RELATED]

Last night, I put the key into the ignition and it turned 360 degrees with no resistance. I pushed the key in toward the steering column, and the switch worked normally.

This morning, I could not get it to fail. Push in, pull out, wiggle the key, the switch worked normally. I was about to disassemble the switch to examine it, when it occurred to me that, if something has failed, disassembling it may cause it to fall apart, leaving me with an undrivable car.

So, I thought I would ask if anyone has seen this failure mode before, so I can order the right part before taking the thing apart. Does anyone know, is this a failure of the switch or the lock cylinder?

Also, when replacing the lock cylinders, VADIS talks about software being required. Is this because the key and the immobilizer need to be paired and stored in the computer? Does replacing the switch and not the lock cylinder not require the software (and the expensive visit to the dealer)?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Ignition switch doesn't engage [S70][1999]
posted by  someone claiming to be Peter  on Sat Jun 28 12:38 CST 2014 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.