Volvo AWD S70 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2006 S70 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

O2 sensor code (P0133) S70 1998

posted by  KlausC on  Tue Jul 16 10:04 CST 2013
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 10:15 CST 2014
[RELATED]

Spraying the O2 sensor with a penetrant (not WD40) will probably do nothing for your mechanic as you will drive the car to him and burn up any of the penetrant in the process. He knows it is hard to get out and has probably done several hundreds by now.

If you really want to spray, the O2 sensor can be seen from underneath.

You might want to clean off the wire connector if you can find it. Look behind the air cleaner near the top of the transmission. There are two square connectors usually covered in sand/dirt.

http://volvospeed.com/volvo_repairs_how_tos/sensor_replacement/oxygen_sensor_o2.html
--
Klausc, a Volvoholic






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New O2 sensor code (P0133) [S70][1998]
posted by  Mr. Detail  on Tue Jun 11 05:34 CST 2013 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.