Volvo AWD 850 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 8/2008 850 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Stripped/Cross threaded intake manifold screw during PCV job 850 1995

posted by  HO on  Mon Jul 16 10:26 CST 2012
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Aug 12 14:01 CST 2014
[RELATED]

Klaus,

Thank you for your response. I am going to use 7 new screws on intake manifold. That's why I removed them all. The support bracket is pain in the neck. I will have to remove the fan shroud to get more space to tighten the bracket to the bottom of intake manifold with the bottom bolt loose. I did not do that when I unscrewed the bottom bolt. It took me almost 1 hour with 2 swirl extensions to get to that bolt (weird angle) from the bottom of the car. If my daughter was there to help me, it would be faster. The Oil dipstick bolt was easy from the bottom straight up using extension.

Ching-Ho Cheng

--
1995 855 NA, Bilstein Strut & Shocks, Volvo Protective Grill, K&N Filter, E-Code Lens, ClearCorner Light, Alpine CD-Changer, AutoDim RearView Mirror, 6000K HID






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Stripped/Cross threaded intake manifold screw during PCV job [850][1995]
posted by  HO  on Mon Jul 16 05:59 CST 2012 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.