I just purchased a 98 S70 T5 with 91,000 on it for a steal ($2,800). The ABS, and tracs lights were all lit up. I changed out the ABS control module and the TRACS and ABS lights both went of but within 5 miles the CEL light came on and now its throwing codes P0442 and code P0301. Also, when I give it a little gas the CEL light flashes. It has a rough idle, but feels fine after that. Did I put something together wrong or did I pull a an air hose when I fixed the ABS module? It feels like an air leak even though its the code for a misfire on cylinder number 1. Also, is cylinder number 1 on the passenger side or driver side of the engine? Any suggestions would be greatly appreciated.
P.S. I have a 94 850 N/A 5 speed and it is way more fun to drive than the T5!!!
|