OK- I took off the door panel:
1. Popped off triangle plastic piece right above the door panel
2. Popped out the plastic rivets by placing a very large flat screwdriver under the door panel at each rivet, and they popped right out with the centers still inside(I know some folks said to drive the center pins through, but I didnt find that I needed to)
3.lifted the window switch out and disconnected the two interfaces.
4.unscrewed 2 torx screws inside the pull handle(after popping off the cover)
5.lifted the panel up and over the lock button and disconnected the speaker wire.

Now for the hard part of my job. I simply can not figure out where that little black plastic disk with the screw in the post goes???? I looked and looked and it is far from obvious where that part fell off from?? I ran the window up and down and watched, but still I could not see where it goes? Help....