Volvo AWD 850 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 3/2021 850 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Re: TORX set...what am I looking for, exactly? 850 1993

posted by  someone claiming to be Rich K. Fairfax, VA on  Tue Dec 26 14:03 CST 2000 [RELATED]

Torx set, 1/4 drive, 15mm,20mm,25mm,30mm, 3/8 drive 35mm,40mm,45mm

The 3/8 40mm should be at least 6 inches long for the T-stat removal.

The only hex I can think you really need is a 3mm (1/4 in drive) to remove the rotor, oh ya a 7mm to remove the slide pins on the front brakes.

95% of my tools are snap-on, good tools, warranty for life and the guy stops by the shop every thursday.

If you can't find a snap-on dealer Sears will work.

snapon.com is a link I haven't tried but it's there.





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New TORX set...what am I looking for, exactly? [850][1993]
posted by  someone claiming to be Tom  on Tue Dec 26 11:50 CST 2000 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.