Volvo AWD 850 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2003 850 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

NEED HELP changing thermostat! 850 95

posted by  someone claiming to be dave on  Thu Dec 7 08:11 CST 2000 [RELATED]

HELP!

I've drained my coolant 1/2 gallon, pulled the upper radiator and expansion

tank hoses from the t-stat housing, but the 2 large torx screws that hold

the t-stat housing to its base are extremely reluctant to budge.

Is it common for these suckers to require an ungodly amount of torque in

order to break them free, or should I leave this potentially destructive

operation to a professional?

My torx bit is a 1/4" hex, not especially high quality but in excellent

condition. I have a Craftsman 1/4" socket (1/4" drive). The required

torque seems very excessive for 1/4" tools. Larger tools have trouble

reaching one of the 2 large torx screws. Is the answer a better tool (3/8"

drive torx bit?), to more easily apply more torque?

Engine is completely @ ambient temp (~ 55 dF).

TIA,

- Dave; '95 854T, 105K mi





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New NEED HELP changing thermostat! [850][95]
posted by  someone claiming to be dave  on Thu Dec 7 08:11 CST 2000 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.