Recently my left rear tire developed a leak. I took to a tire shop to get it fixed when they told me I need two new tires. Shore enough, they were both worn threw the steel belt on the inside of the tire so it was hard to see from the side. They also told me that I need a rear alignment. When I got home , I lifted the car up and found a bent control arm on the right side. I took it off and straightened it in a hydraulic press. It turned out to be a piece of hollow tubing that was very rusty. It looked like someone backed into something and bent it. I don't know how long it has been that way but it is too long. I discovered an adjustment bolt toward the middle of the car but I don't know how to adjust it correctly. Does any one have any info on this ? Thanks for all help !!!
RK