Volvo AWD 850 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2003 850 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Cracked block fix update 850 1997

posted by  Torque on  Tue Oct 20 14:51 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Aug 1 10:12 CST 2014
[RELATED]

The epoxy repair was about $490 to remove and replace intake manifold, prep engine block, apply epoxy. They said a lot of time was spent trying to dam up the epoxy as it ran down the block.

I provided the epoxy JB Weld based on "word of mouth" and a search here since there was post regarding the same fix to the problematic 960 blocks.

I still smell antifreeze after driving, but haven't had the time to check it out in detail. No obvious drips like there was before the repair.
--
1993 240 Classic; 1992 240; 1997 850 GLT






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 Cracked block fix update [850][1997]
posted by  Torque  on Thu Oct 15 13:49 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.