Volvo AWD 850 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 6/2012 850 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Engine Code 2-4-1 pulled from A2 socket 850 1995

posted by  Icelandic on  Wed Apr 22 09:34 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue May 8 06:35 CST 2012
[RELATED]

In order to clean the hole, without removing EGR, I suggest you use a piece of wire with a 90° bent end so you can pull crud out of the hole. Once all the crud is out and around the hole pull it out of the intake using a vacumm cleaner. The EGR has to be cleaned with carb cleaner or TB cleaner, but it has to be removed.You do not need to do anything with the vacumm diaphragm. Just the body of the valve has to be cleaned internally. When you remove it, there is a asbestos/graphite gasket where the valve attaches to the manifold. If you are carefull and it is in good shape, you can reuse it. Otherwise replace.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Engine Code 2-4-1 pulled from A2 socket [850][1995]
posted by  Mr. Detail  on Wed Apr 22 06:36 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.