Thanks Klaus, you were right it wasn't difficult to find the screws and I snugged them up a bit and was very careful not to overtighten them.
I raised the trailing edge so that it slightly higher than it was, by loosening the screws and repositioning the glass. The problem is that it still rattles.
Can the slides be built up, or can the plastic be changed? I pulled up the parts in VADIS and I see a piece on each side that the screws for the glass go into. The only slides I see are parts of the frame that screws into the roof. Is there another fix?
--
I'm stuck on Volvo and Volvo's stuck on me....
|