Volvo AWD V70-XC70 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 9/2005 V70-XC70 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

2.4 Rear Brake Rotor Removal - 15 inch wheels V70-XC70 2003

I'm having the common problem of removing my rear brake rotors on my 2003 V70 2.4L.

Seems that there must be a rust ridge around the inside of the rotor which is hanging up the rotor on the emergency / parking brake shoes. The rotor itself is free and easy to move off the hub, but it is hanging up on the parking brake shoes.

If I hit it with a hammer in the area where the caliper was mounted, the rotor cocks askew, and binds tightly. I have no access anywhere else to hit it, as the dust guard prevents access to the back of the rotor.

I've read a lot about an adjuster star wheel accessible through the lug holes of the rotor, but I can see nothing inside these holes? Does my car have this set up?

Do I need to back off on the parking brake cable adjustment inside the car? If so, can anyone give me some guidance on how this is done on my car?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 2.4 Rear Brake Rotor Removal - 15 inch wheels [V70-XC70][2003]
posted by  Daddu  on Fri Jul 13 08:57 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.