Volvo AWD S70 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2006 S70 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Engine mount inspection S70 1998

posted by  Jack43 on  Tue Nov 14 09:43 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 25 15:39 CST 2012
[RELATED]

You get at the mount through the right wheel well. If it looks trashed, it's an easy replacement. Jack up the front end and put it on jack stands. Put a piece of 2X4 crosswise on the pan and jack it up just slightly. The mount is bolted to the subframe and there are two bolts into the engine block--jacking up the pan takes the pressue off the bolts into the block. I did this in 45 minutes-hour. All the jacking takes longer than the R&R of the mount. Here's a link with great instructions and pictures:

http://www.volvospeed.com/Repair/front_mount.php

You can get the mount from FCP Groton www.fcpgroton.com
--
96 850T, Bilstein HD, IPD swaybars-HD endlinks






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Engine mount inspection [S70][1998]
posted by  someone claiming to be John in SW Ontario  on Tue Nov 14 07:53 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.