Volvo AWD S70 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 6/2011 S70 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

S70 side moulding S70

posted by  KlausC on  Tue Jan 31 14:40 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 10:15 CST 2014
[RELATED]

My 95 and 98 have side mouldings that are not taped on. Open the door and at the moulding level there is a little grommet. Pull it off, and look for a small torx screw that hold on the last clip. I dipped my torx driver in axle grease so that the screw would stick to the driver and not fall down inside the door and never to be seen again. Then the moulding can be pushed forward or backward, I forgot which, and it comes right off. Both doors are line that. The little one on the front fender pops off.

Klaus
--
(V♂LV♂s 1975 164, 1995 854T, 1998 V70R)






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New S70 side moulding [S70]
posted by  someone claiming to be jimbob  on Tue Jan 31 04:22 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.