The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Buying used wheels 850

If you cannot/will not go to a tire shop, you can make a simple jig to check the wheels for truness.

A piece of coat hanger wire stuck into a block of wood (used as a base) can be bent to lie close to the edge of the rim you are testing.

Jack your brick up and chock its wheels. If you leave the emergency brake off, you can mount the test wheel on your rear hub, put the end of the wire near the wheel's edge, and spin the wheel to observe if the rim goes in and out, or up and down.

Practice on one of your steel wheels so that you can do this test without looking too ridiculous. Do the inside and outside.

This can be a DANGEROUS thing to try, and falls in the "Don't do this at home" catagory if you are not confident that you can do it without killing yourself or another!
--
96 855R, 95 855,854, 90 744 Ti - 343,000 Volvo miles put on 7 bricks






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.