The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Changing transmission fluid V70-XC70 1998


Im in full agreement with GordonN. I had posted this info to the OleSeahorse on a previous inquiry. If it is useful, I have served my purpose.

My 99 V70( built in 8/98) was serviced by pulling the top radiator transmission return hose on the right side. I have a lime green plastic clip that hold my hose on and could be removed by compressing the two wings on the clip with your fingers and pulling towards the engine. Mine did not have a metal clip like posted on the IPD instructions. However, I did follow their process by attaching a clear poly hose to the return line and I then added one quart and proceeded to run out one quart at a time. I had a graduated 5 gallon bucket which could be used to stop when each quart was removed. I used 12 quarts before it ran clean at my 70m change. Did not have any problem with leakage, however next time I will see if they have replacement clips and new oil rings.








USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.