The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

'purportedly' a solder problem S70 1998

I'll be sure to put in the modifier that I neglected to put in the last post; I don't want to be the purveyor of potentially erroneous information.

The number one cause of failure in any printed circuit board is solder joints, especially if they're subject to physical movement. So in theory, this would be a strong candidate. Secondarily, one might look to a bad diode or something, but that's highly unlikely, and the cpu on the processor wouldn't be a candidate at all. It's very likely cracks in the solder or the wafer board itself that cause the failure. DIY repair would be difficult because of the silicone sealant that would need to be removed, and eventually re-flowed.

My indy tech has also heard that solder failure is the problem, but as he is Volvo certified, he follows protocol and swaps the board. He also reports that once swapped, the fix is effective and permanent.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.