The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Connector repair V70-XC70

Not the same Robert who is well-known for his DIY videos. I view them often.

I'll try Penetrox A.

My 2000 V70's particular issue is a random misfire which will always occur in Cylinder #3. The car will run fine for hundreds of miles, then out of the blue will trigger the CEL and run rough with a #3 misfire. I will unplug the #3 coil receptacle housing, remove the coil, reinstall the same coil or swap with a spare, and #3 fires again normally. Problem will randomly repeat later.

The #3 coil connector has been repinned into a new receptacle housing, new #3 coil wires spliced in along the top of the cylinder head, and grounds checked. Have also removed and reseated the ECU.

I have no logical explanation why the #3 random misfire occurs. It's especially mystifying when simply unplugging, removing and reinstalling the #3 coil will solve the problem until a few hundred miles later when it will happen again.







USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.