The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

42 camshaft cover bolts removed. 2 are trapped. V70-XC70 2006

Good afternoon, Klaus.

I now have removed 42 bolts from the camshaft cover. There are two more that are trapped beneath a unit that bridges the two camshafts on the RH side of the engine. They are both loose from the head but I cannot get them out because of the bridge aarrangement

Stupid question: is this bridge part of the VVT setup? Will removing it to retrieve the bolts create more problems? I started to remove it and then noticed the gasket between it and the head cover. I would only be taking it off so that I could put the two bolts in the bag with the other 42.

I will try to supply a picture.

Bob







USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.