The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

cam timing marks, etc. V70-XC70 2006

Morning Klaus,

I will try to attach a picture of the cam sprockets. If I am successful you will see where I have put some marks [A&B]on the image. My foremost gear [the intake cam?] is blue. My aft gear [exhaust cam?] is unpainted grey.

If I put some paint splotches at A and B would they be useful when it comes time to reassemble? I can't seem to get behind these sprockets to make marks that cover the sprocket and its shaft.

I had another go at the turbo-to-manifold nuts but cannot get to the fourth nut from on top. I will try from underneath next.

Strange but the wrench that fits the nuts best is a half inch. The thirteen mm fits but is a little loose. Twelve is too small. The half is perfect.

I also wanted to note that there is an "M" stamped on both gears. Don't know what that means. I have been using the single 'cut' on the aft gear as a marker.











USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.