The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Which Brake Position Sensor - the one that the photos match or the one listed to fit? V70-XC70 2007

From a member of Britain's Volvo club:

"Before you change the sensor , just try unplugging the wiring from it and plugging it back in do this several times, you may find it will work fine after you do this because it resistance based measurement and if you have a poor connection on the plug it will put the sensor out of range.
I discovered this by accident when I was looking to replace my sensor needed to look at number of pins in the plug as there are two types for my car and when I plugged it back in it worked for a few days before going faulty again , so I just repeated the action several times and now its been working fine for months."

I would suggest a dab of di-electric grease while you are at it.

--
Keeping it running is better than buying new






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.