The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

El Stupido Installs New Struts V70-XC70 2003

After 200+K miles I finally got around to replacing the front struts this past weekend with OEM Sachs units. Also new spring seats, strut bearings, boots/bump stops. What an improvement in ride quality!

As I was assembling the pieces on the bench I discovered I didn't have any new strut caps. "Darn, must have overlooked that when I ordered the parts!" The originals still looked very good so I reassembled with them rather than hold up the project for new ones. After I was done and was cleaning up after myself, I dug through the packing material and discovered a pair of new caps in the bottom of the box. "Why didn't I check the packing slip earlier?"

So my question..... If I wanted to swap in the new caps, as long as I have weight-on-wheels, couldn't I just unscrew the top nut and replace the cap? It appears the hole in the top of the inner fender is large enough to allow the old cap to be removed and the new one dropped in. Any harm in this?






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.