The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

took apart new door stop piece...how to reassemble? 850

Hi Andrew,

The only grease points should be the rollers, one on the spring and the other, wider one in the frame. No grease (white lithium grease) on the tongue that attaches to the A pillar. Perhaps a little in the pivot point at the T40 hinge.

The rollers are different widths, so the tonge part will only travel on half of the wide roller.

The "carabiner" piece is the spring, mine is a bit rusty. I am still surprised that yours came apart! The spring is extremely hard to move, and the tongue even harder. Even dropping it on a cement floor wouldn't do anything except chip the floor.

If the pick&pull had some 850's, I would stop by and get you a passenger side door stop. There is only one 1993 850 and doesn't have any parts I want.

Are you sure you cannot bring it back to the dealer an ask for a new one? You are supposed to have a year.

--
My back feels better when I sit in a Volvo seat






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.