The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Control Arm Replacement - Bolt Removal Tips? C70 1998

My 1998 C70 221k needs at least one control arm replaced (Ball joint boot is ripped). I have a set of replacements on hand and would like complete the repair today.

This is a late-1998 model that uses the 4-bolts-through-the-subframe style control arm.

If you've dealt with this type, you know that the engine is in the way. I don'
t have the "facilities" necessary to lift the engine, so I can't bring any power tools to bear on the bolts.

I made a brief attempt to do this replacement last weekend, but was stymied by lack of access to those bolts. Even with the car sitting on jackstands and the tires under the body, the positioning feels a bit precarious for the wrench and that's the only tool I can get into the tight space.

Does anyone have any good advice on how to loosen these bolts w/o stripping them and w/o dropping the car on my lap?






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.