The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Belt tensioner S80 1999

posted by  Larry P on  Sun Feb 10 09:45 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri May 1 13:19 CST 2009
[RELATED]

Mort, I made a tool from a T60 wrench with a 1/2" drive end. Since the length is a critical dimension, I had to grind off the tool(some from each end) until it was only 2.08" long and then shim down the 1/2" drive end of it to 3/8" with sheet metal so that I could get my 3/8" swivel end wrench plugged into the torx wrench. If you find a short T60 with a 3/8 drive end, life will be simpler. The overall length of my wrench with the socket handle at 90 degrees is 2.66". Sorry metric friends.
Larry P






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.