The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Drivers Door replace 850 1994

posted by  Rule 308 on  Thu Jan 17 04:00 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue May 8 09:20 CST 2012
[RELATED]

Taking the entire door off of an 800 series car is about as easy as it gets. Roll the window down, remove/loosen the two hinge pin retainin screws (they are external torx and mounted right on the outside of the hinge), remove the screw that mounts the door stay to the body (under the rubber boot and it is internal torx), remove the tiny torx screw in the harness connector and rotate the connector counter clockwise until it comes completely loose. Now lift the door assembly up and off.

While I have pulled many, many doors off of 800 series cars, I have never replaced one so have never had to screw with adjusting the hinges to get it to sit in the opening perfectly. Good luck with that.

Mark






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.