Volvo AWD V70-XC70 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 2/2002 V70-XC70 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

PCV banjo bolts question... V70-XC70 2007

uid 33936's pic
posted by  TheBrickTank on  Wed Apr 4 16:25 CST 2018
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 17:54 CST 2014
[RELATED]

Ok, I'm about to put my car back together and I just discovered that the banjo bolts that are part of the PCV system are different both in nut head size and in the physical end of the bolts.

One banjo bolt has a 17mm head and some sort of jiggle thingy inside of it.

The other banjo bolt has a 19mm head and does not have anything inside of it.

One goes to the intake manifold, the other goes to the head on the driver side of the car.

I thought they were both the same until tonight when I started getting things ready for tomorrow's rebuild.

Any help on this is and will be greatly appreciated as I don't want to put the wrong banjo bolt in the wrong spot. My current hunch is the 17mm goes in the head, and the 19mm goes in the intake manifold, but I need to know for sure.

Thanks in advance,

Matt
--
1989 - 245, 1990 - 245, 1991 - 245, and 1993 - 245






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New PCV banjo bolts question... [V70-XC70][2007]
posted by  TheBrickTank  on Wed Apr 4 16:25 CST 2018 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.