Volvo AWD 850 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2002 850 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Tbelt woes continued 850

posted by  KlausC on  Mon Jul 11 10:59 CST 2016
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 10:15 CST 2014
[RELATED]

This is getting embarrassing...

Yesterday afternoon, I put in the new tensioner roller and the tensioner. No, I didn't pull the pin! I just couldn't get the Tbelt under the water pump and over the roller. Nothing budged. So I took off the tensioner. The belt went on real easy. I had ample movement to pull up the tensioner, I thought.

This morning I verified all of the timing marks. Now I cannot get the tensioner into position! The top of the tensioner barrel is touching the roller and I cannot pull up the tensioner by hand any more that it already is. I need approximately 3/4" to get the tensioner to sit properly.

Stuck!

The belt is routed from the crank, roller, intake cam, exhaust cam, under the water pump, over the tensioner roller.

--
Keeping it running is better than buying new






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Tbelt woes continued [850]
posted by  KlausC subscriber  on Mon Jul 11 10:59 CST 2016 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.