Volvo AWD V70-XC70 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2009 V70-XC70 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

torque rod bushing took 2 hrs...but done V70-XC70

posted by  Fribblehead on  Tue Dec 28 09:50 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Jul 14 16:23 CST 2014
[RELATED]

Replaced my upper torque rod bushing using the 3 piece kit from FCP. Looked easy and straight forward and figured I would save some bucks...

Then the fun started.

Decent amount of force to remove the nut and bolt but got it off.

Removed the (already broke from both sides...rubber bushing "innards") and then realized the ruber for the "outer" part of the OEM bushing was stuck to the metal O mount. Cursed and moaned and tried to gently use a flat head to remove or "scrape and dislodge" the rest of the horribly weathered and stuck OEM mount.

Fast forward about 40 minutes, add some patience to the mix, a ball peen hammer, and some determination, moving of the intake and Voila, the rest of the mount popped out. All in all I am glad it came out but could not believe how badly the old mount was "stuck".

Wanted to share, originally I said sure, gimme 15 minutes. Well +1 hour and it is done.

Just some food for thought if your engine is up there and the bushing needs replacement...glad I had the extra free time!






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New torque rod bushing took 2 hrs...but done [V70-XC70]
posted by  Fribblehead  on Tue Dec 28 09:50 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.