Volvo AWD 850 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 11/2001 850 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

95 850 Instrument Cluster Fault Code question 850

posted by  someone claiming to be 145volvowayne on  Sun Oct 14 16:56 CST 2007 [RELATED]

Hello Faithful Brickboard,

I read the fault codes on my 95 855R today and a couple of questions came up.

1. When The test lead is plugged into socket 6 on module for testing the ignition side of the system it won't give me back any codes. As far as I could tell from the Haynes book I should at least get a 1-1-1 code if all is well? What is the problem, or what am I doing wrong?

2. When I ran the Instrument Cluster Identification test with the lead plugged into socket 7 on module A the code 1-2-2 came back. The Haynes manual says this code means "temperature signal interval too long." What does this mean? What the fix for this problem?

Thanks a bunch,

Wayne





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 95 850 Instrument Cluster Fault Code question [850]
posted by  someone claiming to be 145volvowayne  on Sun Oct 14 16:56 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.