Volvo AWD 850 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 9/2004 850 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

blower motor resistor 850

posted by  baneps on  Sat Oct 23 10:20 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

hello friends,
how do i replace my blower motor resistor? i was informed mine is bad since blower runs only on high speed w/c is way too much and might eventually do the blower motor itself. tried bay 13 but they were not clear?
thanks







  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    blower motor resistor 850

    posted by  Hamfisted on  Sat Oct 23 13:48 CST 2004
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

    If you have the Electronic Controlled A/C system the fan speed is controlled by the ECC box there in the dash, there's no seperate resistor to replace. I sent you the troubleshooting guide for the A/C system to help explain it better. See if you get any DTC fault codes when you test the B1 Socket under the hood.




    Mike
    '95 850T







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.