Volvo AWD Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 7/2003

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

upper fire wall/engine mount

I need to replace the mount due to cracks in the rubber. How hard is it to replace. I see I can buy the bushing, but my concern is how do you take the old one out and push the new one in?
Thanks








  REPLY TO THIS MESSAGE    PRINT   SAVE 

upper fire wall/engine mount

easy..buy a gear puller ($20) and push it out...

new one you need some big washers and long bolt to pull it in...

the dealer gave me the (i think) wrong one..but a little judicious sandpaper and grease and it cranked straight in...

i made to circles of wood with 25mm holes cut in them to spread the load around the centre...worked a treat..








  REPLY TO THIS MESSAGE    PRINT   SAVE 

upper fire wall/engine mount

easy..buy a gear puller ($20) and push it out...

new one you need some big washers and long bolt to pull it in...

the dealer gave me the (i think) wrong one..but a little judicious sandpaper and grease and it cranked straight in...

i made to circles of wood with 25mm holes cut in them to spread the load around the centre...worked a treat..








  REPLY TO THIS MESSAGE    PRINT   SAVE 

upper fire wall/engine mount

thanks for the info, Hopefully this weekend I can do. It's the second time it has gone out, 850 has 135,500 miles on it and run like a champ
--
run it hard, run it fast







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.