Volvo AWD S70 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 11/2003 S70 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Sticking Hood Release Mechanism S70

Hi there. I have a 2000 S70 GLT with a hood release mechanism that sticks on both sides of the hood. The hood-sticking originally was isolated to one side of the hood but after the dealer tried a few 'corrections', it now sticks on both sides when cold (at 60F or colder). In warm weather or after the car has been warmed-up, the hood can be opened.

I have brought the car to my Volvo dealer several times and explained the problem each time. The dealer's response was, at first, to add lubrication to the locking mechanisms. That didn't work. I convinced the dealer (after three failed lubrication tries) to replace the hood release cable (Part #: 9152942-0). However, even after that repair was completed, the problem persists. The dealer most recently added cold weather grease to the locking mechanism. That didn't work either.

I will be leaving the car at the dealership this week to, again, trouble-shoot this problem (the car will be out of warranty in 3 weeks). Any suggestions on what the problem may be and what the dealer should look for would be appreciated.

Thanks in advance.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Sticking Hood Release Mechanism [S70]
posted by  someone claiming to be Lara's Uncle  on Fri Nov 28 16:21 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.