After waxing the car, I clear the nozzles with a safety pin.
Before you tear up the car, pull the wiper away from the window so it doesn't touch the glass. Then try holding the washer button down for 20-30 seconds or so. If there is still no spray, then either the delivery tube became disconnected or the nozzle is completely blocked.
Take a look around the right side of the trunk and the ground, checking for any fluid.
I had thought that the washer nozzle was in the painted portion above the glass. That means you only need to remove the upper trim.
--
Keeping it running is better than buying new
|