Volvo AWD V70-XC70 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 9/2008 V70-XC70 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

P2 A?C clutch shims V70-XC70 2004

What are people using to shim the air conditioner clutch on P2 cars ? Our '04 V70 does not have the post for the bread clips. There is a phillips headed screw in that area but it not clear how to fit anything under the bushing there.

Thanks

Greg








  •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

    P2 A?C clutch shims V70-XC70 2004

    You can use zip ties, look at the last picture at the bottom of the page:

    https://www.matthewsvolvosite.com/forums/viewtopic.php?f=1&t=31203

    Or you can remove the clutch plate and remove a shim - the hard way:

    https://www.matthewsvolvosite.com/video-shim-the-ac-clutch-on-a-p2-volvo.html

    In either case, measure the gap first. Then measure the gap after the 'fix'.
    --
    Keeping it running is better than buying new








    •   REPLY TO THIS MESSAGE    PRINT   SAVE 

      P2 A?C clutch shims V70-XC70 2004

      Thanks Klaus,

      I wound up using 0.023" wire from my MIG welder. The 4" zipties were too thick. With the wire I could feel a little drag on the clutch.

      Greg







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.