Volvo AWD Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 5/2006

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Motor mount failure after 1 year

posted by  andybbrown on  Sat Jul 5 19:52 CST 2014
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 06:08 CST 2014
[RELATED]

It was me who installed this mount, yet the only thing I wonder is if the outer circle is not fully flush - it's about 1mm out of the circle wall on the flange part passenger side. Yet I did install it firmly into position by tapping around the outer circle edge into place. And it seems fine on the driver side as can see in photo. About 12 taps in total to fit it.
Can anyone recommend why this happened and also whether there is a better mount for next time. I had thought this was oem, maybe I was mistaken. Will look for the part I used a bit later.
(I hope the photo is displayed. I usually have a problem uploading photos. But they are held in the Technical gallery.)





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Motor mount failure after 1 year
posted by  andybbrown  on Sat Jul 5 19:52 CST 2014 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.