Volvo AWD 850 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 10/2004 850 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Downpipe !!! 850 95

I just order a TD04HL-18T turbo for my 850 T5 recently, however the downpipe for my car won't fit into those new turbos (16T, 18T). If I order the downpipe from V70 AWD R, for sure it can connect to 18T turbo perfectly, however can it connect to my 850 exhaust without modification?

95' 850 T5..a lot of IPD stuff...








  •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

    To be perfectly sure . . . 850 95

    get a custom made downpipe.

    A custom made 3" T-304 stainless steel downpipe should cost $600 CAN or less or $400 US or less. It should take less then a day to fabricate, and if your shop is reputable, it should have a life time warranty for you. Plus, more than likely being a shop that has experience working with exhausts for turbocharged cars, and using such a generic turbocharger, the Mitsu TD04HL-18T, they should be able to do it in no time, in relative ease and with expertise from experience.








    •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

      Re: To be perfectly sure . . . 850 95

      thart turbo you ordered how much did it cost you? you might not get much out of it remember your limited ECU you'll be lucky if you can get 20 HP increase out of it







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.