Volvo AWD V70-XC70 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 9/2010 V70-XC70 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

2003 Upper Engine Mount Cross Brace Slop V70-XC70 2003

posted by  a Volvo believer on  Tue Oct 15 18:47 CST 2013
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Nov 29 22:36 CST 2013
[RELATED]

I have a 2003 V70 2.4T Along with the upper engine mount being torn, I also noticed that if I grab the crossbar that it attaches to I can easily rotate it forward and backward one-quarter inch before it hits any resistance. This is the cross bar that straddles the strut towers.
Is this normal or do I need to replace these mounts too ???

--
'89 silver 244DL in Milwaukee WI








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

2003 Upper Engine Mount Cross Brace Slop V70-XC70 2003

posted by  KlausC on  Tue Oct 15 20:51 CST 2013
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 10:15 CST 2014
[RELATED]

Not really. The bar is there to support/brace the top of the struts. If you can pull/push the brace from side to side, then you have a problem.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.