Volvo AWD V70-XC70 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 12/2019 V70-XC70 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

J hose to evap canister? V70-XC70 1999

posted by  David in NC on  Sat Apr 23 14:26 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue May 27 16:22 CST 2014
[RELATED]

I got a P0442 code and most folks here say the J hose is the place to start. But, what is the easy way to change this hose? Do I have to remove the fender liner to gain access? I can reach it but don't want to break something trying to change out the hose. Any hints? Thanks, David.








  •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

    J hose to evap canister? V70-XC70 1999

    posted by  KlausC on  Sat Apr 23 14:50 CST 2011
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Fri Oct 24 10:15 CST 2014
    [RELATED]

    http://www.youtube.com/watch?v=lNI3RZXUSaM

    I would take a damp paper towel and try wiping off the J hose first to check it. A length of electrical tape to cover any cracks might help for a few days or a week, enough to cycle the engine and see if the light goes off and stays off.

    Check other vacuum lines back there. My 1998 had a 4 inch piece of vacuum line back in the same area split.

    Klaus
    --
    Always willing to listen, just not able to take direction.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.