Volvo AWD S80 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2014 S80 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

cam cover bolt torque (T6 engine) S80 1999

posted by  tmannian on  Mon Sep 13 08:58 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Sep 20 10:31 CST 2014
[RELATED]

I don't think you'll find a better answer than based on the size of the bolt. Given they're M7's its 17nm. I don't believe there is any special procedure for installing the bolts except I've heard you want to go inside to outside when you do it. I'm not entirely sure that matters since you NEED the press tools to hold it down and it should be easier. DO NOT try to bring the cover down without the press tools. You WILL strip the bolts and the cover will not clamp down.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New cam cover bolt torque (T6 engine) [S80][1999]
posted by  anderssj subscriber  on Mon Sep 13 08:02 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.