Volvo AWD S40-V40 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 3/2005 S40-V40 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Code P0107 S40-V40

posted by  DEG on  Wed Jun 30 15:20 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Apr 21 07:22 CST 2014
[RELATED]

I'm getting code P0107 on my 2001 S40.Should I replace the MAP sensor?
Could some other area be causing the low input voltage?
The car starts right up & runs fine.No other codes.Exactly where is the MAP located?On the intake or up on the firewall?Any suggestions out there?
Dennis








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Code P0107 S40-V40

posted by  KlausC on  Wed Jun 30 16:56 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 10:15 CST 2014
[RELATED]

On the 850/70 models, it is on the passenger front fender, just behind the headlight. Just a 1 inch cube with 2/3 wires. Your car will run fine as is, the default is a pressure of about 30 inches of a barometer. It just enhances the fuel injection which fluctuates whit changes in barometric air pressure.

Look on FCPGroton.com web site for your year/model to see what it looks like and see if you can find it in your car. Easy to replace, but try cleaning the contacts in the plug first.

Klaus
--
Why are Volvos so endearing? Its just a car.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.