Volvo AWD S80 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2001 S80 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

error code P0036 and P0136 S80 1999

Need some advice
Reading error codes P0036 and P0136
Any suggestions how I can rectify?
Thanks
Mort








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

error code P0036 and P0136 S80 1999

P0036 = O2 sensor heater failed
p0136 = O2 Sensor Circuit Malfunction (Bank 1 Sensor 2)


So you will need a new front O2 sensor. When the heater element fails, replacement is the only cure.
The P0136 is for the rear O2 sensor. Either replace it or check the wiring and then replace it.

But, still check your vacuum elbows and any thing that can leak around the intake manifold.

Klaus
--
Praying for Cynthia Amendt, heaven bound








  REPLY TO THIS MESSAGE    PRINT   SAVE 

error code P0036 and P0136 S80 1999

These are both O2 sensor codes. I would check for a vacuum leak first.
--
Jake







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.