Volvo AWD 850 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2011 850 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Oil pan bolt pattern 850

posted by  rocketman4321 on  Mon Jul 7 01:24 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Jul 6 10:32 CST 2014
[RELATED]

Does anybody know the correct location for the 4 longest bolts holding the 850T oil pan? I thought I'd kept them correct, and it was the four by the transaxle. Two seem correct--the ones that go through "towers" in the pan casting. But the two middle ones go right through the threads. Thanks!








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Oil pan bolt pattern 850

posted by  TomL on  Mon Jul 7 08:19 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Jul 25 18:24 CST 2010
[RELATED]

The four long bolts go into the four holes up from the bottom at the transaxle. Make sure you get them started straight an into the threaded holes. It is easy to start them threading between the flywheel and the block. (don't ask me how I know this)
I just installed the pan on two engines.
--
Tom 69-1800S, 72-1800ES, 96-850T,2000-S70 GLT-SE








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Oil pan bolt pattern 850

posted by  rocketman4321 on  Mon Jul 7 09:36 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Jul 6 10:32 CST 2014
[RELATED]

Between flywheel and the block--hmmm. That would likely explain the grinding noise I heard on startup! I'll try putting what's left of them straight in. Thanks!








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Oil pan bolt pattern 850

posted by  TomL on  Mon Jul 7 11:04 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Jul 25 18:24 CST 2010
[RELATED]

You will most likely have to touch up the threads with a die or replace the bolts with new ones.
--
Tom 69-1800S, 72-1800ES, 96-850T,2000-S70 GLT-SE







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.