Volvo AWD 850 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 8/2008 850 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Radiator Top bolt 850

posted by  someone claiming to be Sandro Seminara on  Tue Jan 29 07:25 CST 2008 [RELATED]

So while I was doing a tranny oil change I was over looking my future radiator change when it gets warm here. My biggest concer are the two 10mm toward the top of the radiator. I grabbed a 10mm 1/4 socket and placed a unversal joint on one end and then an extension connected to the rachet. I tried taking the bolt out, but it seems to be an award angel to get leverage on the bolt. Anyone figure out another way? I was thinking of maybe drilling a 1/4 hole through the black plastic that makes this bolt so hard to remove. Any ideas would very much help.

Regards
Sandro








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Radiator Top bolt 850

posted by  KlausC on  Tue Jan 29 15:13 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 10:15 CST 2014
[RELATED]

By the time you take out all of the plastic stuff, the bolt should be easy to remove.

Klaus
--
The 164 has a new home, all I am left with are a 95 854T and a 98 V70R :)








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Radiator Top bolt 850

posted by  someone claiming to be Sandro Seminara on  Tue Jan 29 21:00 CST 2008 [RELATED]

I'm thinking a small hole thru the black plastic would help expidete the bolt removal.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.