Volvo AWD Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 10/2015

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Codes Pulled at Auto zone CEL light reset after ABS re install

posted by  cmarion on  Sun Jun 3 09:14 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Apr 22 08:32 CST 2014
[RELATED]

Hi, Just reinstalled my rebuilt abs Module rebuilt by Victor. Speedo and Cruise work perfect now, My problem is check engine light is still on . Auto zone ran the codes they are as follows. P0722 Speed Sensor P1618 Manufactures Code P0422 any idea what these codes represent and or how to clear them would be greatly appreciated. Thanks.








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    Codes Pulled at Auto zone CEL light reset after ABS re install

    posted by  someone claiming to be Peter on  Sun Jun 3 13:50 CST 2007 [RELATED]

    P1618 means "Diagnostic trouble code in another module"
    P0422 is "3-way catalytic converter efficiency" and may be a permanent or intermittent fault.

    I suspect the "other module" the P1618 is referring to is the ABS module. Did you clear the codes after you read them? They may be related to something that is not a problem any more. Otherwise, they'll come back after a bit of driving.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.