Volvo AWD 850 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 12/2023 850 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

850 Trailer Hitch Installation - how to get to frame rail bolt? 850


I want to move a drawtite trailer hitch from one 854 to another. The hitch mounts with 2 bolts behind the bumper and one in a frame rail. Seemed easy enough when I started, but I do not see how to get to the bolt in the frame rail. It looks like the original installer did some violence to enlarge an existing frame rail hole that is about a foot away from this bolt, perhaps to get the bolt in there??

I can get the hitch off the old car but don't see how to install that frame-rail bolt on the new car.... Is there a trick to getting the bolt in there on the recipient car?

Thanks,

Terry








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    850 Trailer Hitch Installation - how to get to frame rail bolt? 850

    I don't know if this will help you at all, but here is a document for another company that discusses bolt installation. Good luck. Don
    http://www.hiddenhitch.com/fitguides/pdf/N90801.pdf







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.